CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Finer hex meshing for a composite body

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 9, 2017, 16:40
Arrow Finer hex meshing for a composite body
  #1
New Member
 
Nehal Aryaan
Join Date: Apr 2017
Posts: 2
Rep Power: 0
nehalary is on a distinguished road
Hey guys,I have this issue with hex only meshing where i have two electrodes and are separated in air volume and i need to do electrical analysis.
I want finer hex only mesh near the electrodes for the air volume but in the second file i attached i tried to do edge sizing and the nodes dont match !

I have been stuck for weeks now,can anyone help with this ?

https://drive.google.com/open?id=0B8...VFtV1YyR3U3M2c
https://drive.google.com/open?id=0B8...UlnRlp5eGxPYmM
nehalary is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] Meshing a cuboid with hex haow ANSYS Meshing & Geometry 4 February 29, 2016 10:01
[gmsh] Vertex numbering is dense KateEisenhower Open Source Meshers: Gmsh, Netgen, CGNS, ... 7 August 3, 2015 10:49
[ICEM] Meshing Multi Solid Body for CFD marauder ANSYS Meshing & Geometry 0 March 18, 2015 07:32
URGENT!!Need help my body dissapear in fluent after meshing mizi FLUENT 4 April 28, 2012 12:37
CheckMeshbs errors ivanyao OpenFOAM Running, Solving & CFD 2 March 11, 2009 03:34


All times are GMT -4. The time now is 20:43.