[ICEM] Question about backward compatibility

granzer · April 18, 2017, 09:47

Is ICEM 17 backward compatible with ICEM 14.5? I want to open the project files made in ICEM 14.5 in ICEM 17 to run the mesh quality check.

FJSJ · June 23, 2017, 08:14

Hi Granzer,

As fas as I know, I think you don't have problems with forward compatibility. However, backward one, I think...is restricted to just the current release and the two previous..

For geometry, there is no problem becasue you can save your tetin file as other previous releases.. but for blocking... the only thing I know is the legacy ANSYS ICEM CFD 4.0 format... and ANSYS ICEM CFD 5.0 is currently working from ANSYS 11...

Hope this helps...

granzer · June 24, 2017, 02:42

Hello FJSJ,
Thank you for the reply.Yes, the project file did work in ICEM 17.I had compatibility problem when working with fluent. Glad that didn't happen with ICEM.

April 18, 2017, 09:47	Question about backward compatibility	#1
granzer Senior Member Mandeep Shetty Join Date: Apr 2016 Posts: 185 Rep Power: 10	Is ICEM 17 backward compatible with ICEM 14.5? I want to open the project files made in ICEM 14.5 in ICEM 17 to run the mesh quality check.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Guide: How to ask a question on the forums	jola	Site Help, Feedback & Discussions	0	July 29, 2016 18:52
Question about symmetry in Autodesk Cfd 2016	ecto	Autodesk Simulation CFD	0	October 20, 2015 04:16
small question about the functionalities of topological changes in OpenFoam	ngj	OpenFOAM Running, Solving & CFD	2	February 28, 2013 10:02
Question Re Engineering Data Source	imnull	ANSYS	0	March 5, 2012 13:51
internal field question - PitzDaily Case	atareen64	OpenFOAM Running, Solving & CFD	2	January 26, 2011 15:26

June 23, 2017, 08:14		#2
FJSJ Senior Member Javi Join Date: Jan 2013 Posts: 276 Rep Power: 16	Hi Granzer, As fas as I know, I think you don't have problems with forward compatibility. However, backward one, I think...is restricted to just the current release and the two previous.. For geometry, there is no problem becasue you can save your tetin file as other previous releases.. but for blocking... the only thing I know is the legacy ANSYS ICEM CFD 4.0 format... and ANSYS ICEM CFD 5.0 is currently working from ANSYS 11... Hope this helps...

June 24, 2017, 02:42		#3
granzer Senior Member Mandeep Shetty Join Date: Apr 2016 Posts: 185 Rep Power: 10	Hello FJSJ, Thank you for the reply.Yes, the project file did work in ICEM 17.I had compatibility problem when working with fluent. Glad that didn't happen with ICEM.