CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] there is something wrong with my mesh, can anybody help? (https://www.cfd-online.com/Forums/ansys-meshing/188859-there-something-wrong-my-mesh-can-anybody-help.html)

XMU June 8, 2017 08:24
there is something wrong with my mesh, can anybody help?
 
2 Attachment(s)
Hello guys,
I have generated mesh through ICEM. Then I made mesh unvisible, however it's just look like some mesh "attached" on the geometry(just as the picture shows). According to the result of simulation, the geometry did change(you can see it from the picture was taken in CFD-post), meawhile the result has been influenced more or less. So I want to learn which leads to this problem. Thank you.(Please pardon me for my poor English. )

KaLium June 8, 2017 08:34
Did you take that picture with icem or fluent? Might be a bug in graphics.

XMU June 8, 2017 08:46
1 Attachment(s)
No, it's not a bug, you can see it from the picture that was taken in CFD-POST, the geometry has been changed.

XMU June 8, 2017 08:47
Quote:
Originally Posted by KaLium (Post 652260)
Did you take that picture with icem or fluent? Might be a bug in graphics.
No, it's not a bug, you can see it from the picture that was taken in CFD-POST, the geometry has been changed.


All times are GMT -4. The time now is 07:39.