|
[Sponsors] |
[ICEM] there is something wrong with my mesh, can anybody help? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 8, 2017, 09:24 |
there is something wrong with my mesh, can anybody help?
|
#1 |
New Member
Join Date: May 2017
Posts: 3
Rep Power: 9 |
Hello guys,
I have generated mesh through ICEM. Then I made mesh unvisible, however it's just look like some mesh "attached" on the geometry(just as the picture shows). According to the result of simulation, the geometry did change(you can see it from the picture was taken in CFD-post), meawhile the result has been influenced more or less. So I want to learn which leads to this problem. Thank you.(Please pardon me for my poor English. ) Last edited by XMU; June 8, 2017 at 09:43. Reason: adding a picture |
|
June 8, 2017, 09:34 |
|
#2 |
Senior Member
Kal-El
Join Date: Apr 2017
Location: Finland
Posts: 150
Rep Power: 9 |
Did you take that picture with icem or fluent? Might be a bug in graphics.
|
|
June 8, 2017, 09:46 |
|
#3 |
New Member
Join Date: May 2017
Posts: 3
Rep Power: 9 |
No, it's not a bug, you can see it from the picture that was taken in CFD-POST, the geometry has been changed.
|
|
June 8, 2017, 09:47 |
|
#4 |
New Member
Join Date: May 2017
Posts: 3
Rep Power: 9 |
||
Tags |
fluent 14, icem 14.0, mesh 3d |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 09:54 |
[ICEM] surface mesh merging problem | everest | ANSYS Meshing & Geometry | 44 | April 14, 2016 07:41 |
[ICEM] Problem making structural mesh on a surface | froztbear | ANSYS Meshing & Geometry | 1 | November 10, 2011 09:52 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 12:55 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 19:10 |