missing geometry warning in Ansys Design Modeler
 

hi, i created a nozzle in Ansys Design Modeler, then i export it in IGES file. when i opened a new project and imported the IGES files, warnings appears and some faces were was messing (see the figure). this is the warning message: " Warning: At least one of the imported/attached/converted bodies could not be validated. It is possible that subsequent modeling operations will fail.
Additional information: The following could not be validated: 1 Unknown Body
Context: Feature Import4 "
https://img15.hostingpics.net/pics/336787Sanstitre.png

its importing as several parts.

when you created it, did you make "part" of all the bodies?
if not then you should, you can also boolean them if you want to treat them as 1 body.

No i did not make "part" i used "skin/loft" to connect the thred sketches ( cercle of inlet + cercle of middle + daisy shape) if you want i will put a screen shot, i still have the project of construction of the nozzle

i made part but nothing changes :(

You can use add freeze in the extrude and skin options instead of add solid. Then select the objects and do " form new part "

Sent from my SM-G570M using CFD Online Forum mobile app

Or add material* I dont remember how it say

Sent from my SM-G570M using CFD Online Forum mobile app