Cannot update new.3dm file in ICEM based on rpl file
Dear All:
Hello~~ I am a new guy in CFD simulation. I am trying to connect rhino(3D model software) with ANSYS. I found ICEM can read .3dm file(Rhino file) so I think maybe can use rpl file to let ICEM automatic meshing my 3dm file by itself. After I did rpl file I found It can work but without update. It means when I revise my .3dm file, ICEM cannot automatic input the same name .3dm file by itself(based on rpl file). I check the process, the ICEM always input .tin file which saved previously.So I think no matter I change the .3dm file or not, ICEM will still read the old .tin file. The automatic process seems failed. It is just my thinking maybe I am wrong. So does anyone can give me some advise? Or maybe some export can teach me how to set ICEM process? Or maybe someone have the same problem? Please share your ideas~~~ Thanks for anyone who pay attention to my topic~~~ Thanks a lot Jimmy |
The different between log and replay file
Dear all :
I am still studying Why my replay file cannot update my mesh file when the input rhino file has been changed. I found some different between log and replay file, maybe this is reason of my problem. I found the log is start with: Code:
{C:/Program Files/ANSYS Inc/v150/icemcfd/win64_amd/bin/3dm2tin} -a F:/Jimmy/OP/1.0edition/Rhino-file/connect_icm.3dm F:/Jimmy/OP/1.0edition/Rhino-file/connect_icm.tin Code:
ic_undo_group_begin It is just my opinion. Maybe someone can share some ideas? Or maybe someone can teach me how to use batch file to run C:/Program Files/ANSYS Inc/v150/icemcfd/win64_amd/bin/3dm2tin.exe and save tin file? Or maybe you have some better idea of this problem, please teach me~~~~ Thanks for all your attention~~~ |
Hi Jimmy,
unfortunately not all commands are recorded in ICEM. But it often prints out the external programs run. You could try adding the following line to your script Code:
ic_exec {C:/Program Files/ANSYS Inc/v150/icemcfd/win64_amd/bin/3dm2tin} -a F:/Jimmy/OP/1.0edition/Rhino-file/connect_icm.3dm F:/Jimmy/OP/1.0edition/Rhino-file/connect_icm.tin Code:
# Getting the installation path With regards, Sebastian |
Dear Sebastian:
Thanks for your reply, I did not expect someone will reply me today. I will follow your advise to do my work. Thanks a lot for your helping!!!! I hope my problem can be solved by your advise, but if cannot work, I search another way and also ask you. I hope It will not waste your much time. Thank you again~ Jimmy |
All times are GMT -4. The time now is 07:22. |