CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Topology strategy ay smooth air intake. (https://www.cfd-online.com/Forums/ansys-meshing/191685-topology-strategy-ay-smooth-air-intake.html)

Kirill_Makarov August 16, 2017 13:44

Topology strategy ay smooth air intake.
 
2 Attachment(s)
Hello! I am creating structured mesh around rather smooth air intake and find myself troubled to do it. At first sight the solution is rather obvious - triangle block with Y-topology. Unfortunately, this approach does not work because of low quality of sells at intake start point. I am not able to modify geometry in that area because it could affect flow behavior inside the intake so I need to improve quality of sell without changing of geometry. I need some tips from community of how to do this.
Attachment 57800

Attachment 57801

Far September 6, 2017 04:42

you have to use some innovative strategy for this.


All times are GMT -4. The time now is 06:30.