[aravind vashista]

Hii all,
i want to mesh the geometry shown in fig. i use icem to create structured mesh using blockin. I am able to create y grid at the tip of the wedge. I am unable to produce good mesh in the channel (cavity or opening). please give me some tips or help me in meshing this geometry.


surface.jpg

[aravind vashista]

Originally Posted by aravind vashista

Hii all,
i want to mesh the geometry shown in fig. i use icem to create structured mesh using blockin. I am able to create y grid at the tip of the wedge. I am unable to produce good mesh in the channel (cavity or opening). please give me some tips or help me in meshing this geometry.


Attachment 59323

i have created blocks seperately for internal wall ( shown in blue) and channel ( shown in green). The internal wall is solid and fluid flows in the channel portion. I am having problem in associating edge to curve at the intersection of 2 blocks of channel. This can be understood from the iso and side view of the curve and blocks fig shown. Can someone please help me in solving this issue.

b.jpg

int surface.jpg

cb.jpg

cb side.jpg