CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Interior remesh boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 5, 2017, 09:45
Default Interior remesh boundary condition
  #1
New Member
 
chill
Join Date: Oct 2017
Posts: 1
Rep Power: 0
Chilol is on a distinguished road
hi everyone,
I just watched a tutorial video on youtube about dynamic mesh which i have attached the link below.

https://www.youtube.com/watch?v=jU9zkIUDz0c

Right until now i have did all the boundary condition except this one which stand as "fluid-fluid_remesh" (the green box-shape outside the rigid box). The type of this boundary condition is "interior". Currently, i am stuck at this. Can you guys please teach me how to do that. I really need some help.

Thank you in advance.
Chilol is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Centrifugal fan j0hnny CFX 12 January 7, 2016 03:44
sliding mesh problem in CFX Saima CFX 45 September 22, 2015 10:53
Accessing multiple boundary patches from a custom boundary condition file ripudaman OpenFOAM Programming & Development 0 October 22, 2014 18:34
Radiation interface hinca CFX 15 January 26, 2014 18:11
An error has occurred in cfx5solve: volo87 CFX 5 June 14, 2013 17:44


All times are GMT -4. The time now is 08:39.