CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] general tips on improving mesh quality?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 8, 2017, 14:28
Default general tips on improving mesh quality?
  #1
Member
 
Join Date: Oct 2017
Posts: 89
Rep Power: 8
Guille1811 is on a distinguished road
All the information ive found on improving mesh quality on not complex geometries is basically the same: use proper sizing and inflation where it is required.

Ive done that and my mesh quality paremeters are all in the "acceptable" range. Despite that, i need to keep improving them due to simulation/convergence problems.

Basically i reached a point where improving my sizing and inflation settings does nothing to my mesh quality, so i ask: what other factors/settings can i modify to improve quality? (hex method its not compatible with my model btw)
Guille1811 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 15 November 18, 2020 07:09
[snappyHexMesh] No layers in a small gap bobburnquist OpenFOAM Meshing & Mesh Conversion 6 August 26, 2015 10:38
[ICEM] Improving mesh quality neprendo ANSYS Meshing & Geometry 1 June 19, 2014 09:56
[ANSYS Meshing] improving mesh quality gshankarau ANSYS Meshing & Geometry 2 April 10, 2014 08:02
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11


All times are GMT -4. The time now is 11:32.