CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] Double Pre-mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 18, 2017, 08:55
Default Double Pre-mesh
  #1
New Member
 
Vans
Join Date: Nov 2017
Posts: 5
Rep Power: 2
zenip is on a distinguished road
Hi, after an error to import my mesh in Fluent :

(WARNING: Mesh has uncovered edges. ANSYS Fluent needs a complete boundary (lines in 2D) or it will give a variety of errors and not read in the mesh! If this was 2D Hexa, perhaps your edges are not associated with perimeter curves".
)

, i have done a mesh check and accept all the request.

Now i have a new problem, when i open my project i have the original mesh and when i click on pre-mesh i have a second mesh on the first one. How i can delete the last one ?

Thanks
zenip is offline   Reply With Quote

Old   November 28, 2017, 06:46
Default
  #2
Senior Member
 
Gweher's Avatar
 
Gwenael H.
Join Date: Mar 2011
Location: Switzerland
Posts: 251
Rep Power: 13
Gweher is on a distinguished road
Hi Vans,

You can simply unload the existing mesh > file > mesh > close mesh. Or when you convert your new pre-mesh, select > replace to overwrite the existing one.

Have fun
Gweher is offline   Reply With Quote

Old   November 28, 2017, 13:51
Default
  #3
New Member
 
Vans
Join Date: Nov 2017
Posts: 5
Rep Power: 2
zenip is on a distinguished road
Thanks a lot !!
zenip is offline   Reply With Quote

Old   November 29, 2017, 07:11
Default
  #4
Senior Member
 
Gweher's Avatar
 
Gwenael H.
Join Date: Mar 2011
Location: Switzerland
Posts: 251
Rep Power: 13
Gweher is on a distinguished road
You're welcome
Gweher is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Continuing User Defined Real Gas Model issues aeroman FLUENT 6 April 8, 2016 03:34
New densitybased solver AeroFoam giulio_romanelli OpenFOAM Running, Solving & CFD 48 January 15, 2016 08:20
sliding mesh problem in CFX Saima CFX 45 September 22, 2015 10:53
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation tommymoose ANSYS Meshing & Geometry 48 April 15, 2013 04:24
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10


All times are GMT -4. The time now is 07:02.