CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] & SpaceClaim Baflles shared topology

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 20, 2017, 13:29
Default & SpaceClaim Baflles shared topology
  #1
New Member
 
LUCJAN POZORSKI
Join Date: Nov 2017
Posts: 1
Rep Power: 0
jacekPOZOR is on a distinguished road
hello

I want to share topology between surface and volume, i wonder how to share topology baffles witch is completly within volume,

Can someone suggest me how to set up this problem in SpaceClaim 18.2 and ansysMeshing 18.2?

I wonder how i have to construct a modell tree.
Should i have to put surfaces and volumes into separate part and merge it?

I do this like below:

ASSEMBLY OF DOMAIN WATER: (SHARE)

WATER 1 (SHARE)

SUB-ASSEMBLY DOMAIN WATER AND BAFFLES: (SHARE)

PART 1 - Volume (SHARE)
PART 2 - Baffles (MERGE)

and it takes no effect- Fluent cant see baffles as wall "0" thcikenss.

Manual says that i have to use MEREGE operation, but i wonder what with what excatly i have to merge?

I don want to merge all water domain, water blocks have to share with each other.
jacekPOZOR is offline   Reply With Quote

Old   November 23, 2017, 09:32
Default
  #2
Senior Member
 
Gweher's Avatar
 
Gwenael H.
Join Date: Mar 2011
Location: Switzerland
Posts: 244
Rep Power: 12
Gweher is on a distinguished road
Hi Lucjan,

Itís a bit difficult to figure out the geometry youíre trying to model, as we say a picture is worth a thousand words

As a general guideline, in SC if you have several entities you can regroup them in a component and decide which option of Share topology you want (i.e. None / Group / Share / Merge). Moreover in SC under the workbench tab > sharing , you have access to different tools to imprint areas / faces to across different bodies. This should solve your problem.

Have fun
Gweher is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
decomposePar problem: Cell 0contains face labels out of range vaina74 OpenFOAM Pre-Processing 30 August 23, 2017 13:25
Foam::error::PrintStack almir OpenFOAM Running, Solving & CFD 83 July 22, 2017 08:26
Decomposing meshes Tobi OpenFOAM Pre-Processing 4 July 13, 2017 05:03
Importing Multiple Meshes thomasnwalshiii OpenFOAM Meshing & Mesh Conversion 18 December 19, 2015 19:57
SigFpe when running ANY application in parallel Pj. OpenFOAM Running, Solving & CFD 3 April 23, 2015 14:53


All times are GMT -4. The time now is 02:25.