CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ICEM] Converting 2D blocking to 3D

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 24, 2017, 03:23
Default Converting 2D blocking to 3D
  #1
New Member
 
Somashekhar Kulkarni
Join Date: Oct 2017
Posts: 9
Rep Power: 2
somas123 is on a distinguished road
The geometry that I want to mesh is given in the picture below. I've created a surface block using the swept option in 2d surface blocking. The blocking is also shown in the attached image. The main issue that I am facing is in converting the surface block to a 3D block. I've tried using different techniques in the multizone fill option but in vain. Can anyone provide suggestions?
Attached Images
File Type: jpg test section.JPG (15.3 KB, 10 views)
File Type: jpg test section blocking.JPG (19.8 KB, 8 views)
somas123 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Blocking technique. Issues of the day. Zeppo ANSYS Meshing & Geometry 12 December 9, 2017 13:14
[ICEM] Correct blocking and Ogrid in ICEM salumi ANSYS Meshing & Geometry 3 November 8, 2016 11:10
[ICEM] Converting or projecting Edge (of blocking) to generate curve AshwaniAssam ANSYS Meshing & Geometry 0 October 9, 2013 23:55
[ICEM] Problem to load the blocking biasilveira ANSYS Meshing & Geometry 2 February 24, 2013 23:04
[ICEM] Blocking and Symmetry BrolY ANSYS Meshing & Geometry 32 August 24, 2012 03:13


All times are GMT -4. The time now is 05:22.