CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] error domain (https://www.cfd-online.com/Forums/ansys-meshing/196159-error-domain.html)

Jorkoslav November 27, 2017 08:44
error domain
 
5 Attachment(s)
Hi guys! I tried so many times and ways to create the fluid domain in this 3D model but every times the software gave me error. I am adding pics of the my case. Thx for helping !

Gweher November 27, 2017 09:59
Hi Georgi,

Looks like something went wrong with the importing process. Do you mind sharing your WB project setup as an archive (.wbpz)?

Jorkoslav November 28, 2017 02:07
Hi Gwenael,

Here is my project. Thanks for your support beforehand!
(.wbpz)

Gweher November 28, 2017 03:18
1 Attachment(s)
Hi Georgi,

I should have had a closer look at your initial post, as I had this error once a long time ago. It’s an easy fix. You can’t use special characters in your project name / path. In your case it was just the comma @ “0,9mm” so just replace it with “.” and that it.

Have fun ;)

Jorkoslav November 28, 2017 04:10
Really thanks Gwenael !!! You are wizard :D

Gweher November 28, 2017 05:24
You're welcome Georgi ;)


All times are GMT -4. The time now is 10:09.