CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[GAMBIT] 3d airfoil meshing problem, face meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 19, 2017, 04:38
Default 3d airfoil meshing problem, face meshing
  #1
New Member
 
osman kutlu
Join Date: Apr 2017
Posts: 6
Rep Power: 8
osmankutlu is on a distinguished road
Hello everybody. I need a help in a matter. I am going to simulate a 3d wing so I need to cooper mesh for domain and I should use ''tri-pave'' type for face. I mesh easyly front face using tri pave type but when I use the link face mesh, back face is really bad. I need to use link face to cooper mesh volume but link face is really bad. Here are some pictures. Is there anybody help me please? I really appreciate...
Attached Images
File Type: jpg frontface.jpg (86.1 KB, 13 views)
File Type: jpg backface.jpg (125.2 KB, 12 views)
File Type: jpg backface2.jpg (172.0 KB, 14 views)
osmankutlu is offline   Reply With Quote

Old   December 19, 2017, 08:17
Default
  #2
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41
-mAx- will become famous soon enough
Do you also have the problem without face mesh linking?
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Old   December 19, 2017, 08:25
Default
  #3
New Member
 
osman kutlu
Join Date: Apr 2017
Posts: 6
Rep Power: 8
osmankutlu is on a distinguished road
Thanks for replying realy thank you... Yes also I have problem. Trying both without link face mesh and link face mesh to cooper mesh, gambit gives error. I have tried also using edge link or seperately mesh face but the same problem facing.
osmankutlu is offline   Reply With Quote

Old   December 19, 2017, 10:28
Default
  #4
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41
-mAx- will become famous soon enough
Then I would create a surface surrounding your wing, and split your domain with it.
Doing that, you willl have more control on the mesh near the wing, and also you should avoid the effect you described.
Mesh the volume near the wing with hexa
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Old   December 19, 2017, 11:23
Default
  #5
New Member
 
osman kutlu
Join Date: Apr 2017
Posts: 6
Rep Power: 8
osmankutlu is on a distinguished road
Shared geometry pictures already surrounded near wing,real wing inside the that domain. For a long time I tried to mesh just wing and after I created surface surrounding like I shared geometry but same problem.I cant go forward anymore.I tried many things all I can do (changing surround geometry). This is the link my file if you look and help me really appreciate..thank you so much.

http://www.gigasize.com/get/xmtxnwcq7pb
osmankutlu is offline   Reply With Quote

Old   December 20, 2017, 02:26
Default
  #6
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41
-mAx- will become famous soon enough
upload your file on dropbox or whatever, because your link gives me lots of undesired popup.
I am at the office...
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Old   December 20, 2017, 03:08
Default
  #7
New Member
 
osman kutlu
Join Date: Apr 2017
Posts: 6
Rep Power: 8
osmankutlu is on a distinguished road
Ohh ok ok here is the dropbox link thank you..
https://www.dropbox.com/sh/dlz1xvt8z...iYDumy5ma?dl=0
osmankutlu is offline   Reply With Quote

Old   December 20, 2017, 09:15
Default
  #8
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41
-mAx- will become famous soon enough
Alright,
There is a tolopology issue.
One workaround is to split your geometry 1 or 2 times along the z-axis.
It solves your problem
Capture.jpg
No time to mesh something wonderful...
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Old   December 20, 2017, 09:42
Default
  #9
New Member
 
osman kutlu
Join Date: Apr 2017
Posts: 6
Rep Power: 8
osmankutlu is on a distinguished road
Thank you so much for response. You used quad-map scheme but my prof told me it should be tri-pave... Is there any other way to do that by using tri-pave?
osmankutlu is offline   Reply With Quote

Old   December 21, 2017, 02:01
Default
  #10
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41
-mAx- will become famous soon enough
yes you can do it also with tri-pave .
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Old   December 21, 2017, 06:36
Default
  #11
New Member
 
osman kutlu
Join Date: Apr 2017
Posts: 6
Rep Power: 8
osmankutlu is on a distinguished road
I have tried many times but failed, even after you told me I tried it by splitting z directions but not successful. If you have time could you do and upload here, I would really appreciate it
osmankutlu is offline   Reply With Quote

Reply

Tags
cooper scheme, face meshing 3d, gambit mesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with airfoil shape optimization robyTKD SU2 Shape Design 7 March 7, 2022 17:18
[blockMesh] non-orthogonal faces and incorrect orientation? nennbs OpenFOAM Meshing & Mesh Conversion 7 April 17, 2013 06:42
[blockMesh] error message with modeling a cube with a hold at the center hsingtzu OpenFOAM Meshing & Mesh Conversion 2 March 14, 2012 10:56
Problem Meshing Airfoil erodv OpenFOAM 12 January 11, 2012 18:46
Meshing an airfoil in 2d problem pisanopisalo FLUENT 1 January 9, 2012 03:02


All times are GMT -4. The time now is 08:14.