|
[Sponsors] |
March 31, 2018, 11:50 |
Need help---ICEM multi-block meshing
|
#1 |
New Member
Shaoze
Join Date: Mar 2017
Posts: 5
Rep Power: 9 |
Hello everyone,
I'm working on ICEM multi-block meshing for a complex wing-body aircraft model. I really need some help as none of my colleges has ever used multi-block meshing. I'd be much appreciated if anyone can give me a hint. My model is just a normal aircraft except there is a blowing slot on the trailing edge, and there is a chamber inside the wing. I prefer to use multi-block meshing which gives a mapped surface mesh and unstructured volume mesh to fill up the far field space, in the meantime I want the mesh inside the chamber to be a structured hexa volume mesh. That means there will be two types of volume mesh, inside the blowing chamber is structured, and outside space is unstructured. The problem is how can I divide the volume mesh into two different types? I have tried to draw an interface on the blowing slot, then using multi-block meshing to generate mapped surface with tetra volume, and then using 'extrude face' to generate a block inside the blowing chamber. Everything went well until I extruded the new block inside the chamber, the tetra mesh failed... Does anyone have an idea on how to use multi-block mesh properly in this case? Many thanks! Shaoze |
|
Tags |
icem multi block mesh |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ANSYS Meshing] SHIP MESHING * using ansys WORKBENCH or ICEM CFD | Ctunramran | ANSYS Meshing & Geometry | 1 | February 23, 2016 07:06 |
[ICEM] Meshing Chamfered Cube Block | mhmtblt | ANSYS Meshing & Geometry | 0 | December 10, 2015 07:22 |
[blockMesh] Mixer mesh - negative volume problem | jadtwo | OpenFOAM Meshing & Mesh Conversion | 2 | November 6, 2014 16:37 |
Help me to choose between Ansys Meshing, Fluent Meshing or ICEM ? | pipolaki | ANSYS | 0 | December 6, 2013 08:12 |
Using ICEM CFD to repair/edit ANSYS Meshing | Kaaji1359 | ANSYS | 2 | July 30, 2013 10:28 |