CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Structured Mesh inside an egg-like geometry

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 8, 2018, 14:05
Default Structured Mesh inside an egg-like geometry
  #1
New Member
 
Join Date: Aug 2018
Posts: 2
Rep Power: 0
BrunoCFD is on a distinguished road
Hello everyone,
i want to create a structured mesh for a half-egg-like geometry using ANSYS Meshing and Spaceclaim (student ver 19.1). In the center of the "egg" i created a cylinder body in order to create a structured mesh.



I sliced the geometry into different bodies and obtained a structured mesh by using the multizone method. For two bodies however multizone method is not able to create a structured mesh (see "Mesh" Picture). I also tried face meshing and sweeping around the axis and from top to bottom. Shared topolgoy is on for all bodies. Ansys tells me, that both bodies are sweepable. It is also not possible to mesh them as single bodys supressing all over bodies (Picture "Mesh single body")

I hope someone can help me or has a solution to this problem. Right now i am assuming that the corners are too sharp for a strucutred mesh.



Best Regards

Bruno


Geometry:https://imgur.com/xDuRYuW
Mesh:https://imgur.com/bQbnWNJ
Mesh single body:https://imgur.com/mw6QThj
BrunoCFD is offline   Reply With Quote

Old   October 31, 2018, 15:48
Default
  #2
Senior Member
 
Erik
Join Date: Feb 2011
Location: Earth (Land portion)
Posts: 1,166
Rep Power: 23
evcelica is on a distinguished road
Use the same "number of divisions" for line sizing for your mesh along those horizontal lines.
evcelica is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
structured vol. mesh on complex geometry syoo Pointwise & Gridgen 3 January 13, 2014 12:32
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM kawamatt2 ANSYS Meshing & Geometry 17 December 20, 2011 12:45
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 19:10
unstructured vs. structured grids Frank Muldoon Main CFD Forum 1 January 5, 1999 11:09


All times are GMT -4. The time now is 03:15.