CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] Trailing Edge gets distorted in meshing (https://www.cfd-online.com/Forums/ansys-meshing/214515-trailing-edge-gets-distorted-meshing.html)

Samarth Kakkar February 4, 2019 05:12

Trailing Edge gets distorted in meshing
 
1 Attachment(s)
I am performing 2d analysis of FX-63137 airfoil on ANSYS fluent using Structured mesh and during meshing, the trailing edge gets distorted leading to very high aspect ratio elements as shown in the attached figure.

Kindly provide guidance for proceeding further.


All times are GMT -4. The time now is 05:10.