CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] 2D Boundary Layer Edges (https://www.cfd-online.com/Forums/ansys-meshing/215560-2d-boundary-layer-edges.html)

eknight March 8, 2019 12:49

2D Boundary Layer Edges
 
1 Attachment(s)
I'm making a 2D geometry that needs a fine boundary layer around certain edges and I've been having a lot of issues making the boundary layer collapse into the walls without needing to manually change the spacing.

I need to have a different gradient within the actual edge, so ideally I would be able to control the edge mesh and the boundary layer separately. Right now I am using prism growth on the curve, but it doesn't continue to the edges. I also checked Blayer 2d in the "Advanced Prism Meshing Parameters" but this didn't seem to change anything.

Any help would be much appreciated! Thank you in advanced!


All times are GMT -4. The time now is 19:08.