 |
 |
 |
|
|
|
[Sponsors] | ||||
March 21, 2019, 06:19
|
Importing Geometry Issue
|
#1 |
|
New Member
Scott Haazen
Join Date: Mar 2019
Posts: 1
Rep Power: 0  |
In the picture bellow you can see the model I have imported into ANSYS workbench 18.1. Only one of the segments are imported as a solid, the rest are surfaces. I believe this is messing up the mesh. Has anyone got any ideas on how to import the segments as solids? Also, I have made numerous changes to the model and imported it into ansys and the segments seem to swap around as to which ones are surfaces which ones are solids.
All input is appreciated, thanks |
|
|
|
|
|
April 1, 2019, 13:35
|
|
#2 |
|
New Member
anon
Join Date: Feb 2019
Posts: 2
Rep Power: 0 |
before clicking generate you will see option in DM (design modeler)- something along lines upload solids, surfaces, lines
un check surfaces and lines and leave only solids.t then you can go back to space claim that should help you. |
|
|
|
|
|
 |
| Tags |
| geometry, import, import cad, import solids, model |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [ANSYS Meshing] Importing Geometry for analysis in Ansys AQWA | AlexK | ANSYS Meshing & Geometry | 1 | October 29, 2017 09:19 |
| Issue Importing NASTRAN file to STAR CCM+ | Eve258 | STAR-CCM+ | 2 | February 9, 2017 07:15 |
| [DesignModeler] Refresh Geometry Import issue | mcmario | ANSYS Meshing & Geometry | 0 | November 16, 2016 04:51 |
| [ICEM] Issue creating geometry and trim surfaces | M4x1m | ANSYS Meshing & Geometry | 1 | February 9, 2015 08:38 |
| [ICEM] importing a geometry from Turbogrid to ICEM | c120613 | ANSYS Meshing & Geometry | 1 | May 14, 2013 23:59 |
Linear Mode
