[ICEM] Please create topology and try again

Alvin1990 · July 7, 2020, 14:10

I am new in icem. I am trying to do 2d surface blocking on a pipe junction but failed to do so. Its giving me error "Please create topology and try again". I have no clue what i did wrong. Can anyone help me?

Gweher · July 8, 2020, 03:29

Hi Mesbahose,

Depending on how you created your geometry you may need to run the topology check first. If you have overlapping surfaces / disjoint / gaps you need it will correct them and display a color code. Go under Geometry > Repair Geometry > Build Diagnostic Topology > Apply.

Then you can create your surface blocking.

Have fun

Alvin1990 · July 8, 2020, 08:45

Thnx it worked.��

Gweher · July 9, 2020, 03:41

Great to hear it worked

July 8, 2020, 03:29		#2
Gweher Senior Member Gwenael H. Join Date: Mar 2011 Location: Switzerland Posts: 392 Rep Power: 20	Hi Mesbahose, Depending on how you created your geometry you may need to run the topology check first. If you have overlapping surfaces / disjoint / gaps you need it will correct them and display a color code. Go under Geometry > Repair Geometry > Build Diagnostic Topology > Apply. Then you can create your surface blocking. Have fun Alvin1990 and aero_head like this.

July 8, 2020, 08:45		#3
Alvin1990 New Member Md. Mesbahose Salekeen Join Date: May 2018 Posts: 12 Rep Power: 7	Thnx it worked.��

July 9, 2020, 03:41		#4
Gweher Senior Member Gwenael H. Join Date: Mar 2011 Location: Switzerland Posts: 392 Rep Power: 20	Great to hear it worked