[ICEM] Pre Mesh Intersects on 'Project Surfaces'

sacrover · July 24, 2019, 07:04

Hi,
I am trying to mesh an external flowfield around a propeller using hexa blocking. The computational domain is divided into two parts:
1. Farfield (stationary frame)
2. Disc around the blade (Rotational frame)

I've split the blocks and used O-grids around the blade section. Everything is fine until I click Pre-Mesh>Project Surfaces. Grid lines are crossing each other almost everywhere along the blade. I've tried moving the O-grid vertices that are associated to the airfoil sections but there's no improvement. I've attached the screenshots.

Thanks for your help.

Gweher · July 30, 2019, 05:37

Hi Sachin,

Looks like an association problem to me. Check if all your edges / vertices are associated to curves / points. Also under the pre-mesh you can either project to surfaces or edges so check the option you've picked.

Have fun

sacrover · August 8, 2019, 13:43

Thanks alot Gwenael. I re-checked all my associations and, more importantly, I split the blocks' edges (linearly and as splines) to align them with the airfoil sections. This ensured that the blocks conformed to the surfaces and, essentially, that it prevented any 'distortion' of mesh while projecting it onto the the surfaces.

Gweher · August 9, 2019, 10:08

Hi Sachin, great thanks for your feedback and good to know it worked!

July 30, 2019, 05:37		#2
Gweher Senior Member Gwenael H. Join Date: Mar 2011 Location: Switzerland Posts: 392 Rep Power: 20	Hi Sachin, Looks like an association problem to me. Check if all your edges / vertices are associated to curves / points. Also under the pre-mesh you can either project to surfaces or edges so check the option you've picked. Have fun Светлана and aero_head like this.

August 8, 2019, 13:43		#3
sacrover New Member Sachin Verma Join Date: May 2017 Posts: 7 Rep Power: 8	Thanks alot Gwenael. I re-checked all my associations and, more importantly, I split the blocks' edges (linearly and as splines) to align them with the airfoil sections. This ensured that the blocks conformed to the surfaces and, essentially, that it prevented any 'distortion' of mesh while projecting it onto the the surfaces. Светлана likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[blockMesh] Sphere mesh with blockMesh - weird cells	TheMadHungarian	OpenFOAM Meshing & Mesh Conversion	1	October 22, 2018 09:03
[snappyHexMesh] SHM problem : KVLCC2 with appendage mesh	sc.park	OpenFOAM Meshing & Mesh Conversion	1	March 13, 2016 13:28
[snappyHexMesh] SnappyHexMesh no layers and no decent mesh for complex geometry	pizzaspinate	OpenFOAM Meshing & Mesh Conversion	1	February 25, 2015 07:05
[snappyHexMesh] Layers:problem with curvature	giulio.topazio	OpenFOAM Meshing & Mesh Conversion	10	August 22, 2012 09:03
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11

August 9, 2019, 10:08		#4
Gweher Senior Member Gwenael H. Join Date: Mar 2011 Location: Switzerland Posts: 392 Rep Power: 20	Hi Sachin, great thanks for your feedback and good to know it worked!