[ANSYS Meshing] Use of replay script for automatic meshing for the same kind of Geometry in ICEM

ruchit@15847 · August 5, 2019, 07:59

Hi, everyone

I have almost 30 rocket nozzle contours having a different inlet and exit angle of a divergent section of the nozzle. All the nozzle contoures have been made on Autodesk Inventor.

Now, I have meshed one contour in ICEM CFD using blocking strategy and recorded all the steps in Replay script. Now I want to use this replay script for other remaining contours.

As we all know, replay script works on point, curves and surface names in ICEM. Now the problem is coming like when I am importing STEP or IGES file in ICEM for different contours, the point, curves, and surfaces name are coming with different names for all contours. e.g. similar kind of color 1 and contour 2 has three curves. So when I import this STEP file to ICEM, curves names for the contour 1 is like curve 1, curve 2 and curve 3 and for contour 2, curve names is curve 2, curve 3, curve 4. So, my replay script doesn't work or if it is worked, it is creating arbitrary meshing.

So, is there any settings in ICEM through which I can have the same names for all points, curves or anything I have to do while exporting a file from Autodesk ??

tianxuyan · June 7, 2022, 20:20

Hi, Ruchit
I also meet this problem now. Have you handled it?
Please give me some hints.

Tianxu Yan

August 5, 2019, 07:59	Use of replay script for automatic meshing for the same kind of Geometry in ICEM	#1
ruchit@15847 New Member Ruchit Patel Join Date: May 2018 Location: Chennai Posts: 24 Rep Power: 7	Hi, everyone I have almost 30 rocket nozzle contours having a different inlet and exit angle of a divergent section of the nozzle. All the nozzle contoures have been made on Autodesk Inventor. Now, I have meshed one contour in ICEM CFD using blocking strategy and recorded all the steps in Replay script. Now I want to use this replay script for other remaining contours. As we all know, replay script works on point, curves and surface names in ICEM. Now the problem is coming like when I am importing STEP or IGES file in ICEM for different contours, the point, curves, and surfaces name are coming with different names for all contours. e.g. similar kind of color 1 and contour 2 has three curves. So when I import this STEP file to ICEM, curves names for the contour 1 is like curve 1, curve 2 and curve 3 and for contour 2, curve names is curve 2, curve 3, curve 4. So, my replay script doesn't work or if it is worked, it is creating arbitrary meshing. So, is there any settings in ICEM through which I can have the same names for all points, curves or anything I have to do while exporting a file from Autodesk ??

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Problem Meshing Asymmetrical Geometry	Madhatter92	ANSYS Meshing & Geometry	1	December 23, 2017 05:56
[Gmsh] Vertex numbering is dense	KateEisenhower	OpenFOAM Meshing & Mesh Conversion	7	August 3, 2015 10:49
Help me to choose between Ansys Meshing, Fluent Meshing or ICEM ?	pipolaki	ANSYS	0	December 6, 2013 08:12
Using ICEM CFD to repair/edit ANSYS Meshing	Kaaji1359	ANSYS	2	July 30, 2013 10:28
IGES/IGS format geometry file for icem meshing	littlelz	Main CFD Forum	0	May 27, 2008 18:24

June 7, 2022, 20:20		#2
tianxuyan New Member tianxu yan Join Date: Feb 2022 Posts: 1 Rep Power: 0	Hi, Ruchit I also meet this problem now. Have you handled it? Please give me some hints. Tianxu Yan