 |
 |
 |
|
|
|
[Sponsors] | ||||
[ANSYS Meshing] Meshing problem with airfoil having inward dimple |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 20, 2019, 14:47
|
Meshing problem with airfoil having inward dimple
|
#1 |
|
New Member
Janet J
Join Date: Aug 2019
Location: UK
Posts: 15
Rep Power: 8  |
I am meshing problem with airfoil having inward dimple.
My structured mesh is poor. I put a circle around the airfoil and generated the mesh, it was okay, but the small area around the dimple is still not okay and the Face Meshing has small blue sign on it suggesting something wrong in the mesh. Please guide. Last edited by Janet; August 20, 2019 at 16:41. |
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| High drag for airfoil compared to XFOIL and wind tunnel data | Ry10 | SU2 | 15 | October 30, 2016 18:27 |
| [Gmsh] Vertex numbering is dense | KateEisenhower | OpenFOAM Meshing & Mesh Conversion | 7 | August 3, 2015 11:49 |
| Problem with restart solution in shape_optimization.py | robyTKD | SU2 Shape Design | 21 | May 29, 2013 10:26 |
| [GAMBIT] meshing trailing airfoil | carp | ANSYS Meshing & Geometry | 4 | March 20, 2013 02:12 |
| [Other] Ansys meshing airfoil and / or compressor blades | baw192 | ANSYS Meshing & Geometry | 8 | September 23, 2011 01:43 |
Linear Mode
