|
[Sponsors] |
[ICEM] why could i use the" link edge"function like this |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 8, 2019, 11:52 |
why could i use the" link edge"function like this
|
#1 |
New Member
JiangSU
Join Date: Oct 2019
Posts: 2
Rep Power: 0 |
I learn the airfoil meshing on https://www.youtube.com/watch?v=7GLYQwCsc8A
i want to make a boundary layer,in the video ,the author firstly use ogrid to create a around block, then he use the link edge to make the later edge parallel to the edge he had edit before (10:05) but when i want to do this ,the linked edge coincide to the edge before,i don`t know where is wrong. could anyone help me?Thanks a lot! |
|
October 8, 2019, 12:22 |
|
#2 |
Senior Member
Sebastian Engel
Join Date: Jun 2011
Location: Germany
Posts: 566
Rep Power: 20 |
Hi Jiang,
you have set the (linking) factor to 3.0. In the video it's set to 1.0. This factor is a scaling factor for the target edge shape with respect to the source shape (as the manual states). 1.0 means that the target mesh approximately looks like the source. <1 means the shape is only loosely coupled ("only a slight bend") It seems larger than 1 means the target should increasingly become the source shape. Best regards, Sebastian |
|
October 9, 2019, 11:11 |
|
#3 |
New Member
JiangSU
Join Date: Oct 2019
Posts: 2
Rep Power: 0 |
Hey Sebastian
Thanks so much for your reply,that may not be the main point,even if i set the factor to 1.0, the target edge still coincide to the target edge but not parallel to it. Finally i create the vertices and move it one to one. Best regard Jiang |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
LINK errors compiling udf | marco91 | Fluent UDF and Scheme Programming | 0 | December 5, 2018 07:13 |
Link Coolprop to Fluent UDF | ilfrance90 | Fluent UDF and Scheme Programming | 0 | March 8, 2018 07:14 |
[GAMBIT] Link Face Meshes + Size Function | sasizza | ANSYS Meshing & Geometry | 1 | April 14, 2015 10:01 |
[GAMBIT] Error message: Cannot link faces due to all loops of edges not being specified | Aerogirl | ANSYS Meshing & Geometry | 4 | February 19, 2012 09:21 |
ReleaseNotes13 website link problem | maka | OpenFOAM | 2 | November 22, 2006 05:32 |