CFD Online Discussion Forums
(
https://www.cfd-online.com/Forums/
)
-
ANSYS Meshing & Geometry
(
https://www.cfd-online.com/Forums/ansys-meshing/
)
- - [ICEM]
to selected edges in icem
(
https://www.cfd-online.com/Forums/ansys-meshing/224423-selected-edges-icem.html
)
saeedeh_hamoudi
February 19, 2020 03:01
to selected edges in icem
. Someone has a solution to this problem.
Thank you
All times are GMT -4. The time now is
10:48
.