CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[BladeModeler] ExportPoint problems: cannot create Layers

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 18, 2020, 03:16
Default ExportPoint problems: cannot create Layers
  #1
New Member
 
Join Date: Apr 2017
Posts: 4
Rep Power: 4
SUNGAL is on a distinguished road
Hi everybody! I want to create a mesh in TurboGrid for the existing blade CAD model:
1. Load the .iges file in Design Modeler.

2. Create hub, shroud, input and output sketches using this video: https://www.youtube.com/watch?v=jKRzrj9d4gE

The rotation axis is Z, the plane for the projections of the contours and the input / output is created from the ZX plane.

3. Further create FlowPath and ExportPoint.


However, I canít successfully transfer data to TurboGrid due to an error:

"First blade profile is not defined as a hub tip and is too far (0.780972 of span) from the hub for reliable surface intersection. Must be less than 0.12 of span.". But I cannot include layers in ExportPoint on output, (except for those that have SpanFraction = 0.75 and SpanFraction = 1) - ExportPoint stops working. I would be grateful for your help!
Attached Images
File Type: jpg 2020-03-18 15_10_43-Clipboard.jpg (39.7 KB, 2 views)
File Type: jpg 2020-03-18 15_12_20-Clipboard.jpg (30.3 KB, 1 views)
File Type: jpg 2020-03-18 15_12_49-Clipboard.jpg (35.0 KB, 1 views)
SUNGAL is offline   Reply With Quote

Reply

Tags
blademodeler, exportpoints, turbogrid

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] Create multiple boundary layers in Gmsh Jan.i.engstrom@gmail.com OpenFOAM Meshing & Mesh Conversion 0 October 21, 2016 10:32
Meshing a Sphere Ajay FLUENT 10 September 3, 2016 14:18
Create Binary File Problems gelbebanane Tecplot 2 April 20, 2016 03:18
[snappyHexMesh] SHM Problems with snapping and layers Rojj OpenFOAM Meshing & Mesh Conversion 0 April 14, 2016 13:52
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 11:55


All times are GMT -4. The time now is 01:10.