CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] Correct Meshing Strategy

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 20, 2020, 05:31
Default Correct Meshing Strategy
  #1
New Member
 
James Adams
Join Date: Feb 2020
Posts: 3
Rep Power: 6
hugzmeister is on a distinguished road
Hi Folks,

I'm a little stuck with my current mesh.
Its got a complicated geometry and I was wondering if anyone has any advice on how I could improve the meshing.

I have ran it on a rotational Re of 1e7 and it does not converge. After many meshing changes, I still could not get it to converge. I have tried reducing the Rotational Re to 1e6 and it just about works, but I need tohave it at 1e7.

Let me know what you think.
Attached Files
File Type: pptx Model Divergence Problem Description1.pptx (152.9 KB, 9 views)
hugzmeister is offline   Reply With Quote

Old   March 21, 2020, 12:07
Default
  #2
Senior Member
 
M
Join Date: Dec 2017
Posts: 636
Rep Power: 12
AtoHM is on a distinguished road
In the images I cant see a complex geometry at all. Is that just a cut view?



Your cells are very flat and the grow ratio away from the refined region seems to be quite big. Can you not just avoid the huge elements and add more cells along the edges? The refined regions seem ok and the blocking looks fine from what I can see.
AtoHM is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] snappyHexMesh - 3D Wing Meshing Setup & Trials denbjornen OpenFOAM Meshing & Mesh Conversion 1 May 25, 2020 12:14
[ANSYS Meshing] only automatic meshing works, kazra ANSYS Meshing & Geometry 2 February 23, 2017 12:38
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
[ICEM] 3D Meshing strategy : a bay Magicano ANSYS Meshing & Geometry 0 January 3, 2013 20:02
Which trailing edge is correct for meshing of aerofoils for CFX LSC CFX 0 May 10, 2009 13:45


All times are GMT -4. The time now is 07:23.