CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Fluent Meshing Issue

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 18, 2020, 03:52
Default Fluent Meshing Issue
  #1
New Member
 
43
Join Date: May 2020
Posts: 1
Rep Power: 0
OldStudent is on a distinguished road
I was attempting to use Fluent to analyze an aircraft wing. I initially made my fluid domain too large and decided to scale it down but when I attempted to generate a new mesh it gets to the symmetry face and never moves past that face in the ANSYS Workbench Mesh Status. I've went over how I made the smaller domain, even starting from the original sketches to create a new one but I'm now confused what I possibly could have done. Any help would be greatly appreciated! The attached photos shows the highlighted symmetry face that seems to be the issue.


Figured out: I don't see how to delete this post so I'll just explain my silly oversight/mistake. I set up some face sizing along the leading and trailing edge for mesh refinement. At some point during me reducing the fluid domain size, I accidently also attached the plane of symmetry when assigning the face sizing. Sorry for wasting time(I wasted several hours myself) and if we can delete posts let me know how and I'll get rid of this.
Attached Images
File Type: jpg for ansys help Pic 1.JPG (41.1 KB, 2 views)
File Type: jpg for ansys help Pic 2.JPG (41.4 KB, 2 views)

Last edited by OldStudent; May 18, 2020 at 04:15. Reason: Solved
OldStudent is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] Fluent Meshing benefits djfanf ANSYS Meshing & Geometry 11 November 21, 2017 10:59
Transfer named selections from SW to Fluent Meshing the-sted FLUENT 0 May 1, 2016 23:44
Toolbars of Graphic windows in Fluent Meshing Sina.Li FLUENT 1 December 28, 2015 01:09
Running UDF with Supercomputer roi247 FLUENT 4 October 15, 2015 13:41
Fluent 12.1 on Linux x64 Architecture Issue fivos FLUENT 5 April 24, 2010 15:19


All times are GMT -4. The time now is 08:09.