[ICEM] Problems with edge meshing in one edge

Apahuja · May 27, 2020, 09:36

Hey there!
I am trying to mesh MDA 30P 30N multi-element airfoil. I am facing a problem in meshing a particular edge in the block. when I am increasing the no of nodes from 2 to say 20 half of the block disappears. I have tried exporting as Unstructured mesh in fluent but still, it's showing only half the mesh. The problem is with the edge between the trailing edge of main wing the the leading edge of slat. I will be grateful if anyone can help me. Please let me know if any more screenshots are needed!

Aditya

Apahuja · May 27, 2020, 12:56

I was able to do it, there was an extra node on the top side of the slat.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Problems with coedge curves and surfaces	tommymoose	ANSYS Meshing & Geometry	6	December 1, 2020 11:12
[ICEM] Simple pipe meshing - problems with y+ in CFX	Keizers	ANSYS Meshing & Geometry	23	January 15, 2015 08:00
[ICEM] Problems with meshing a 3D wing w/winglet	cesarcg	ANSYS Meshing & Geometry	10	March 18, 2013 12:12
Meshing for Edge	Charles	Main CFD Forum	0	October 25, 2008 10:07
GAMBIT: Assumption of an edge type while meshing	Agnes	FLUENT	0	June 22, 2005 13:37

May 27, 2020, 12:56		#2
Apahuja New Member Join Date: Mar 2018 Posts: 2 Rep Power: 0	I was able to do it, there was an extra node on the top side of the slat.