CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [Workbench] Changing Spaceclaim Scripting Parameters with Workbench (https://www.cfd-online.com/Forums/ansys-meshing/227412-changing-spaceclaim-scripting-parameters-workbench.html)

konahowler May 28, 2020 04:25

Changing Spaceclaim Scripting Parameters with Workbench
 
3 Attachment(s)
Hello,


i am working on a trade of of different Designs for my Bachelor Thesis. Therefore i wrote severalscripts for Spaceclaim to generate my CAD-Models. This worked fine and i can manualy change all the scripting parameters but when i try to simulate different DesignPoints from my workbench it cant upgrade the geometry->so the Parameters don't change. If I put in some driving Parameters trough Spaceclaim it is possible to change them but for me this is not useable for more complexed models, because I have to change pattern details.



I attached my script for an non complex geometry to see if there are any mistakes i made or any missing comands. Maybe there are any settings i have to set in the workbench project?




Thank you in advance


All times are GMT -4. The time now is 21:58.