[ANSYS Meshing] Workbench mesh Inflation Problem

Med_91 · June 14, 2020, 10:03

Hello,
I have a problem when trying to add inflation into boundary layer in the external section wall, while having face meshing into my fluid domain which i devided into 8 faces.
the problem is that inflation and face mesh do not work together, and if i try to remove face mesh i am not be able to have structural meshing inside my fluid domain, any suggestions to have inflation while still having structural mesh ?

Gweher · July 9, 2020, 03:56

Hi Med_91,

You can use a multizone meshing method (mesh > insert > method > multizone) and then "inflate this method". This should do the trick.

Have fun

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 05:38
3D Hybrid Mesh Errors	DarrenC	ANSYS Meshing & Geometry	11	August 5, 2013 06:42
[ICEM] Problem making structured mesh on a surface	froztbear	ANSYS Meshing & Geometry	4	November 10, 2011 08:52
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 09:38

July 9, 2020, 03:56		#2
Gweher Senior Member Gwenael H. Join Date: Mar 2011 Location: Switzerland Posts: 392 Rep Power: 20	Hi Med_91, You can use a multizone meshing method (mesh > insert > method > multizone) and then "inflate this method". This should do the trick. Have fun