CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Inflation layer cut cell meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   June 21, 2020, 18:22
Default Inflation layer cut cell meshing
New Member
Join Date: Jun 2020
Posts: 1
Rep Power: 0
Akshaykumarpakala is on a distinguished road
Dear sir

i am a masters student at the university of akron and for my thesis ansys meshing software with cut cell meshing is utilized for 3d meshing around the cylinder placed on top of a plane wall. I am experiencing some issues with the generation of inflation layers around the domain

link given below is a google drive link to the word document explaining this issue.

The mesh in the fine mesh region 0.004m and 0.1m is the size of the coarse mesh. 30 inflation layers are to be generated around the domain with cut cell assembly meshing approach.
Reynolds number of the flow is 5.3*10^5 and the y+ for the inflation layer is calculated accordingly.

Thank you
Akshaykumarpakala is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[mesh manipulation] createpatch not working when using layer addition in snappyHexMesh Dikkeunit OpenFOAM Meshing & Mesh Conversion 0 February 3, 2020 09:46
y+ = 1 boundary layer mesh with snappyHexMesh Arzed23 OpenFOAM Running, Solving & CFD 1 July 10, 2019 08:56
[snappyHexMesh] gaps for close surfaces- meshing with sHM jango OpenFOAM Meshing & Mesh Conversion 0 November 28, 2016 02:10
[snappyHexMesh] Meshing connections of round and straight edges JShnyder OpenFOAM Meshing & Mesh Conversion 0 April 24, 2016 11:25
[snappyHexMesh] snappyhexmesh cell splitted ununiform..2D case sharonyue OpenFOAM Meshing & Mesh Conversion 1 April 22, 2013 23:34

All times are GMT -4. The time now is 00:29.