CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Coarse Mesh to Fine Mesh outpu(.dat) transfer

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree2Likes
  • 1 Post By Gweher
  • 1 Post By Gweher

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 2, 2020, 14:08
Default Coarse Mesh to Fine Mesh outpu(.dat) transfer
  #1
New Member
 
Join Date: Jul 2020
Posts: 19
Rep Power: 2
steadyman is on a distinguished road
Hello everyone
I performed a successful CFD analysis with fine mesh(in FLUENT). However, I have to transfer output(.dat etc) of that analysis to a different mesh (same geometry but coarser mesh).
How can I perform this transfer by using ANSYS ?
steadyman is offline   Reply With Quote

Old   July 6, 2020, 01:43
Default
  #2
Senior Member
 
Gweher's Avatar
 
Gwenael H.
Join Date: Mar 2011
Location: Switzerland
Posts: 392
Rep Power: 16
Gweher will become famous soon enough
Hi,

Well if you want to use the results to perform another analysis, say structural deformation from fluid loads you can use the data mapping inside of Workbench.

Have fun
steadyman likes this.
Gweher is offline   Reply With Quote

Old   July 6, 2020, 01:56
Default
  #3
New Member
 
Join Date: Jul 2020
Posts: 19
Rep Power: 2
steadyman is on a distinguished road
Quote:
Originally Posted by Gweher View Post
Hi,

Well if you want to use the results to perform another analysis, say structural deformation from fluid loads you can use the data mapping inside of Workbench.

Have fun
Actually I want to map this fine mesh results to coarse mesh.It is not for another analysis.Just mapping
steadyman is offline   Reply With Quote

Old   July 6, 2020, 02:59
Default
  #4
Senior Member
 
Gweher's Avatar
 
Gwenael H.
Join Date: Mar 2011
Location: Switzerland
Posts: 392
Rep Power: 16
Gweher will become famous soon enough
Ok well if it's just for "visualisation purpose" you could either use an external data in conjunction with a simple model setup and import the field of interest to plot it on the coarser mesh.

Or if you have access to Ansys Ensight post processing tool there is also a way to map it there. Alternatively it should also be possible using paraview. You just need to export your fluent data first to the proper format (*.encas file), same with the coarse mesh. Or you could eventually use the plot csv extension (ansys appstore), to plot it on geometries / meshes.

Have fun
steadyman likes this.
Gweher is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] SnappyHexMesh/splitMeshRegion : region1 in zone "-1" GuiMagyar OpenFOAM Meshing & Mesh Conversion 1 September 10, 2019 09:59
Error - Solar absorber - Solar Thermal Radiation MichaelK CFX 12 September 1, 2016 05:15
[ICEM] Transition layers from quad (or hexa) coarse mesh to quad (or hexa) fine mesh? macfly ANSYS Meshing & Geometry 4 February 10, 2014 06:09
[GAMBIT] How to mesh a cylinder with fine to coarse cells Bharatt ANSYS Meshing & Geometry 3 August 12, 2013 00:45
fine mesh ==> coarse mesh Mahbub Siemens 3 October 11, 2003 01:19


All times are GMT -4. The time now is 17:46.