Hydrofoil Structured Mesh
Hello,
I'm attempting to recreate a mesh for a hydrofoil as I need to change the geometry however I don't have the original workbench file, only the .def file. https://i.ibb.co/h7Sg6kH/Desired-Mesh2.png https://i.ibb.co/TLn86Ns/Desired-Mesh1.png https://i.ibb.co/7VDZmBV/Current-Mesh1.png https://i.ibb.co/hmX18gX/Current-Mesh2.png https://i.ibb.co/51Z39XS/Mesh-setup1.png I've attempted to toy with the meshing parameters assosciated with edge size and havn't managed to produce a structured mesh as shown in the .def file. I've also attempted to use the hex-dominant meshing method however that also reduced the quality of elements around my hydrofoil as they changed from tet to hex. What would be a good method to create a structured mesh as shown in the above photo for the one surface? Thank you |
All times are GMT -4. The time now is 13:53. |