CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Inflation layer around a commercial vehicle

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 10, 2020, 13:47
Angry Inflation layer around a commercial vehicle
  #1
New Member
 
Eddie james
Join Date: Dec 2020
Posts: 1
Rep Power: 0
Eddiej is on a distinguished road
Hi everyone, I’m not a professional at ansys but here goes.

I have a commercial vehicle imported into ansys, and a fluid domain created.

I have also solved for the inflation layer using y+ value as 2 due to using a turbulent model. When trying to apply boundary layer it seems to fail every time I mesh.

Are there any main reasons for this?

Files can be uploaded if required.

Thanks.
Eddiej is offline   Reply With Quote

Old   December 15, 2020, 10:25
Default
  #2
siw
Senior Member
 
Stuart
Join Date: Jul 2009
Location: Portsmouth, England
Posts: 731
Rep Power: 25
siw will become famous soon enough
You will need to upload images of the mesh directly into this thread (not using file hosting sites) otherwise it is practically impossible to suggest helpful advice.
siw is offline   Reply With Quote

Reply

Tags
3d modeling, inflation layer, meshing

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] Problem with the inflation layer: not conserved at the blade tip clktp ANSYS Meshing & Geometry 0 May 25, 2018 05:33
[snappyHexMesh] sHM layer process keeps getting killed MBttR OpenFOAM Meshing & Mesh Conversion 4 August 15, 2016 04:21
[ANSYS Meshing] Cut cell meshing - inflation layer Lucy13 ANSYS Meshing & Geometry 1 November 23, 2015 07:17
[snappyHexMesh] SnappyHexMesh: Layer on corners Pj. OpenFOAM Meshing & Mesh Conversion 9 July 17, 2014 05:26
[snappyHexMesh] Boundary layer in a pipe Clementhuon OpenFOAM Meshing & Mesh Conversion 6 March 12, 2012 13:41


All times are GMT -4. The time now is 05:26.