|
[Sponsors] |
[ANSYS Meshing] geometry directory and mesh results |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 8, 2023, 12:26 |
geometry directory and mesh results
|
#1 |
New Member
Jin Kim
Join Date: May 2022
Posts: 2
Rep Power: 0 |
Hello forum,
I am trying to make a 3D nozzle flow simulation, using Fluent 16.2. I imported my geometry step file from D drive and then meshed it first, but one day I had to change the directory of the step file to C: for certain reasons. So, I copied my step file and moved it to the new folder, changed the directory to the new one and updated it. The problem is, although I am using exactly the same geometry, with exactly the same settings, using the same computer, the result mesh came out different(with worse quality) just because I'm calling my step file from a different location. Is this normal, or is any other way to prevent this issue? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[OpenFOAM.com] swak4foam compiling issues on a cluster | saj216 | OpenFOAM Installation | 5 | January 17, 2023 16:05 |
foam-extend-4.1 release | hjasak | OpenFOAM Announcements from Other Sources | 19 | July 16, 2021 05:02 |
Error Interpolating Results onto New Mesh | nammeh | CFX | 1 | March 26, 2019 12:08 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |
How to read a mesh from a directory other than the default tutorial directory | mali28 | OpenFOAM | 1 | July 6, 2011 14:08 |