|
[Sponsors] |
[ANSYS Meshing] High-skewness cells beside inflation layer |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 10, 2021, 10:11 |
High-skewness cells beside inflation layer
|
#1 |
New Member
Amr Emad
Join Date: Jan 2021
Posts: 1
Rep Power: 0 |
Hello everyone,
I've a geometry of multiple bodies in one part. Two adjacent bodies of them have a problem with cells near the inflation layer as attached. Max skewness is 1. Do you have any ideas to keep the inflation layer as it is and reduce the skewness? Thanks in advance. The problem.jpg Mesh settings 1.jpg Mesh settings 2.jpg Mesh settings 3.jpg Mesh settings 4.jpg Last edited by AmrEmad; January 10, 2021 at 16:06. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to fix high equivolume and centroid skewness in pointwise? | Laurens_NLD | Pointwise & Gridgen | 3 | May 27, 2020 03:41 |
SimpleFoam & Theater | jipai | OpenFOAM Running, Solving & CFD | 3 | June 18, 2019 10:11 |
Problem with entire domain comprised of split hex cells | Arzed23 | Main CFD Forum | 1 | November 7, 2016 23:01 |
Automobile aero ground boundary layer OR simpleFoam/GAMG and high aspect ratio cells | kyle | OpenFOAM Running, Solving & CFD | 4 | January 4, 2011 11:17 |
errors | Fahad | Main CFD Forum | 0 | March 23, 2004 13:20 |