CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] [ICEM] How to use Split Wall command?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 12, 2021, 10:57
Default [ICEM] How to use Split Wall command?
  #1
Member
 
MWRS
Join Date: Apr 2018
Posts: 98
Rep Power: 5
waseeqsiddiqui is on a distinguished road
Hi all. I have a question about the split wall option. If applied to a single surface, it has overlapping set of elements on each side of it. I have observed the following two features:-
1) Check mesh shows surface orientation and overlapping element error.
2) Fluent says "there is only one adjacent cell thread" and declares it as wall.
3) Fluent would make it interior but the behavior of the surface would be as wall and barrier to flow field.
I want to make it interior volume surface. How do I do that? Thank you
waseeqsiddiqui is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Two phase flow in porous medium Milaad OpenFOAM 6 December 15, 2020 07:55
What's the problem with turbulence models near the wall region? Jaydi_21 Main CFD Forum 6 July 7, 2017 02:39
Radiation interface hinca CFX 15 January 26, 2014 17:11
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 11:55
Wall functions Abhijit Tilak Main CFD Forum 6 February 5, 1999 01:16


All times are GMT -4. The time now is 03:41.