CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[DesignModeler] Skin/Loft Feature in JScript

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 26, 2021, 10:10
Default Skin/Loft Feature in JScript
  #1
New Member
 
Join Date: Oct 2017
Posts: 27
Rep Power: 5
Safasml is on a distinguished road
Hi there,
I have a problem with the skin/loft feature. I am designing a blade in DesignModeler and using skin/loft to connect the edges of every section. Also, I use a guideline to connect for example the trailing edges of each section. Now, the problem is sometimes the end of one section connects to the start of the next section (Fig attached), which will cause the skin/loft to fail due to a self-intersection. Since this process is done automatically (many times) I canít correct the guideline every time. I split the edges to several pieces as recommended in the DesignModeler user guide but it didnít work. So I decided to write it in a JScript file and run the js to do the process automatically. But, unfortunately, Iím very beginner in java and I donít know what exactly I should write. I just know the ModStartVertex function should be used but how?
I will really be appreciated that if someone can write the code for me... or any other suggestion to overcome this problemÖ thank you so much.
Attached Images
File Type: png 11.png (31.2 KB, 5 views)
Safasml is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
JScript Command used for Suppressing Joint feature in DesignModeler ? Nawfal Main CFD Forum 1 September 1, 2019 15:15
[snappyHexMesh] surfaceFeatureExtract error- Feature line extraction? anu.raghun OpenFOAM Meshing & Mesh Conversion 2 July 2, 2019 10:43
[snappyHexMesh] Failed Edge Snap with box geometry and correct feature capture thiagomarinho OpenFOAM Meshing & Mesh Conversion 6 April 16, 2019 04:03
[snappyHexMesh] Error snappyhexmesh - Multiple outside loops avinashjagdale OpenFOAM Meshing & Mesh Conversion 53 March 8, 2019 09:42
[snappyHexMesh] Explicit feature edge ref&snap in OF2.2 Eloise OpenFOAM Meshing & Mesh Conversion 0 May 9, 2014 11:39


All times are GMT -4. The time now is 01:45.