Improve mesh of a wind turbine blade inside semi-cylinder(domain)
 

Hi,
I have meshed a wind turbine blade inside semi-cylindrical domain. The attached file contains images that explain the blocking strategy I have used. Could anyone help me improve the quality of the mesh.
Also, my prof suggested another blocking strategy (included in the attachment) for the blocking of the cylinder, but now, I am unable to create a box around the blade (by splitting the block) and I do not know how to proceed.
Any help / hint would be very helpful. Thank you,

Hello,

Could you be more specific when you say you are unable to create a box around the cylinder? You just need to use an O-grid.

Here is a tutorial I found: https://www.youtube.com/watch?v=FG3fbz6g8wk

Also, here is a similar thread: https://www.cfd-online.com/Forums/an...expansion.html

Hope that helps. Let us know if you encounter problems, and please be detailed in the explanation.

The thread should have read "unable to create a box (by splitting the block) around the blade"; I have edited the thread, my apologies.
I was able to mesh the half cylinder perfectly well, using an approach similar to the one suggested in the tutorial link you have posted. The problem with which I want help is: as you can see, the mesh quality around the blade is poor. I had split the block to create a box around the blade to capture its geometry; and I associated the edges of the newly created block to the curves of the blade (also shown in the attached pictures). Though I had managed to capture the geometry well, this method has elements of poor quality around the edges of the blade (also shown in the attached pictures). Please suggest something that would maintain good element quality throughout the semi-cylindrical domain (specifically around the blade).
Thank you for taking time to help me out.

The thread should have read "unable to create a box (by splitting the block inside the semi cylinder) around the blade"; I have edited the thread, my apologies.
I was able to mesh the semi - cylinder perfectly well, using an approach similar to the one suggested in the tutorial link you have posted. The problem with which I want help is: as you can see, the mesh quality around the blade is poor. I had split the block to create a box around the blade to capture its geometry; and I associated the edges of the newly created block to the curves of the blade (also shown in the attached pictures). Though I had managed to capture the geometry well, this method results in elements of poor quality around the edges of the blade (also shown in the attached pictures). Please suggest something that would maintain good element quality throughout the semi-cylindrical domain (specifically around the blade).
Thank you for taking time to help me out.

Hello,

Check out this thread: https://www.cfd-online.com/Forums/an...-modeling.html

You can probably use the 'collapse block' function after initializing an O-Grid about the blade. Post #11 goes over it in detail.

I read through the thread suggested by you. It is about meshing a blade in a cube(asked by Shane and answered by PSYMN), whereas my geometry is semi-cylindrical. I am afraid the procedure suggested there cannot be implemented in my case due to the difference in the geometry.For instance, I cannot make splits similar to those suggested by PSYMN in my geometry.

Also, I have a blunt trailing edge and hence I think we do not have to use " collapse block " option. Please let me know if you have any other ideas. Thank you.