CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[DesignModeler] Different Results when I use the "Imprint Faces" tool

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 13, 2021, 14:25
Default Different Results when I use the "Imprint Faces" tool
  #1
New Member
 
Aspa
Join Date: May 2021
Posts: 2
Rep Power: 0
Aspa is on a distinguished road
Hello,

I've been trying to model a turbofan's intercompressor duct in CFX in which I also added 2 horizontal extensions before and after it. I tried two different ways, (1)by designing, meshing and modelling the whole duct altogether and (2) by separating the "real" duct using the "Imprint Faces" tool in DesignModeler. Even though I use the same meshing options and boundary conditions in the two cases I get different results (pressure losses). Is there a way the results could be affected by this design change?
Aspa is offline   Reply With Quote

Reply

Tags
cfx & fluent, design modeller, imprint face

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
bad heat transfer results with low y+ me45 OpenFOAM Running, Solving & CFD 0 April 29, 2020 12:56
Plot Contact Tool Results Using Path for multiple load steps mirghani Structural Mechanics 0 April 1, 2020 07:19
tool for time averaging results gittagawa SU2 4 December 4, 2019 09:54
Error Interpolating Results onto New Mesh nammeh CFX 1 March 26, 2019 13:08
Creating a tool to interpolate results Luis Batista OpenFOAM Running, Solving & CFD 2 April 11, 2013 09:15


All times are GMT -4. The time now is 12:09.