CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Generating cartesian (non-conformal) octree mesh for Fluent CFD

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 2, 2022, 05:48
Default Generating cartesian (non-conformal) octree mesh for Fluent CFD
  #1
New Member
 
Andreas W.
Join Date: Feb 2022
Posts: 1
Rep Power: 0
AndreasW is on a distinguished road
Hi,

I'm currently investigating aeroacoustics of a rather complex geometry, that requires highly resolved 3D LES Simulation, which I'm performing in Ansys Fluent.

For Meshing I currently use Ansys Workbench Meshing to create a (unstructured Delaunay) tetrahedral mesh or in some regions if possible a hexcore mesh using the MultiZone algorithm.

As the resulting mesh quality is rather poor I wonder if a cartesian octree mesh would yield better results. What i aim for is a mesh similar to what is shown in Picture 5 in [1], which i attached to this post.


As Ansys Workbench Meshing can't create octree meshes to my knowledge, I tried to use the Rapid Octree Algorithm of Fluent Meshing, but unfortunately I can't get it working for any geometry.

As a simple example i tried to mesh a sphere, but Fluent meshing always shows an error, that the geometry (the simple sphere) is not watertight. If I use the watertight meshing workflow however, it works just fine.

I couldn't find any tutorial on how to generate a cartesian non-conformal octree mesh.

I hope some of you can help me or point me to where i can find instructions on how to use this meshing tool.

Best regards
Andreas

[1] Oswald, M. and Sovani, S., 2015. Aero-Vibro-Acoustics For Wind Noise Applications. In 2015 Automotive Simulation World Congress.
Attached Images
File Type: png Picture_5.png (151.2 KB, 9 views)
AndreasW is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] non uniform mesh near the stl object vava10 OpenFOAM Meshing & Mesh Conversion 0 January 31, 2021 14:41
how to set periodic boundary conditions Ganesh FLUENT 15 November 18, 2020 06:09
decomposePar problem: Cell 0contains face labels out of range vaina74 OpenFOAM Pre-Processing 37 July 20, 2020 05:38
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 11:55
How to control Minximum mesh space? hung FLUENT 7 April 18, 2005 09:38


All times are GMT -4. The time now is 12:51.