CFD Online Discussion Forums - [ANSYS Meshing] 3D mesh cells are not attached to the blade

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)

- - [ANSYS Meshing] 3D mesh cells are not attached to the blade (https://www.cfd-online.com/Forums/ansys-meshing/242836-3d-mesh-cells-not-attached-blade.html)

Sakun

May 14, 2022 14:34

3D mesh cells are not attached to the blade

3 Attachment(s)

Hi,

I am meshing naca65 3D blade in ICEM and as shown in the 1 and 2 pictures, mesh cells at the trailling edge are not attached with the blade wall.
i did association many time and still problem is same.

any help is highly appriciated :(

mluckyw

May 31, 2022 02:20

Disassociate the white edge on the TE and then associate it again with the TE curve. Hopefully it works!

All times are GMT -4. The time now is 10:09.