CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] Trouble generating Chevron nozzle mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By mluckyw

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 14, 2022, 00:56
Default Trouble generating Chevron nozzle mesh
  #1
New Member
 
Hoang Long
Join Date: Jun 2022
Posts: 3
Rep Power: 3
nvhlong2911 is on a distinguished road
Hello everyone,
I'm new to ICEM CFD and I have to generate mesh for a 3D Chevron nozzle in order to compare with a Baseline one. The mesh for Baseline seems easier than Chevron which has a number of chevrons at the outlet.
Can anyone give me some method or tool to deal with this problem?
Thank you very much!
https://drive.google.com/file/d/1Cf-...ew?usp=sharing
https://drive.google.com/file/d/1K9R...ew?usp=sharing
nvhlong2911 is offline   Reply With Quote

Old   June 17, 2022, 02:58
Default
  #2
Member
 
Chrowale
Join Date: Sep 2021
Location: Bandung, Indonesia
Posts: 59
Rep Power: 4
mluckyw is on a distinguished road
I think you can actually use two symmetry plane to analyze just one of the six chevron section, that way the blocking would be fairly easy.

I don't know if there's a combustion mixing in the region and if it's valid or not if you apply this method.
nvhlong2911 likes this.
mluckyw is offline   Reply With Quote

Old   June 20, 2022, 06:02
Default
  #3
New Member
 
Hoang Long
Join Date: Jun 2022
Posts: 3
Rep Power: 3
nvhlong2911 is on a distinguished road
Thank you very much for your help, Chrowale,
It's been for a while and now I'm able to mesh the geometry by splitting it in to 1:6, anyway, I'd try to do the meshing with the entire nozzle and check out the difference between them
nvhlong2911 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] snappyHexMesh stuck when snap is turned on yukuns OpenFOAM Meshing & Mesh Conversion 3 February 2, 2021 14:05
decomposePar problem: Cell 0contains face labels out of range vaina74 OpenFOAM Pre-Processing 37 July 20, 2020 06:38
[snappyHexMesh] Creating multiple multiple cell zones with snappyHexMesh - a newbie in deep water! divergence OpenFOAM Meshing & Mesh Conversion 0 January 23, 2019 05:17
[mesh manipulation] Importing Multiple Meshes thomasnwalshiii OpenFOAM Meshing & Mesh Conversion 18 December 19, 2015 19:57
[ICEM] Generating mesh for modified parts in ICEM without changing mesh of other parts a.habibi ANSYS Meshing & Geometry 5 October 4, 2012 06:10


All times are GMT -4. The time now is 07:23.