|
[Sponsors] |
[ICEM] The Mesh Generated through the ICEM CFD is not converging in the Fluent |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 10, 2022, 10:19 |
The Mesh Generated through the ICEM CFD is not converging in the Fluent
|
#1 |
New Member
Chaitanya
Join Date: Aug 2022
Posts: 1
Rep Power: 0 |
All the Quality Criteria are met. Following is the summary of the mesh quality:
For the same geometry, if the mesh was generated through the Gambit is giving good result in the Fluent. But the mesh generated with the above mentioned quality in the ICEM CFD is not converging when solved in the Fluent. Last edited by Chaitanya_06; August 10, 2022 at 10:22. Reason: The Mesh generated in the ICEM CFD is Structured mesh generated with Blocking |
|
August 12, 2022, 03:53 |
|
#2 |
Senior Member
Gert-Jan
Join Date: Oct 2012
Location: Europe
Posts: 1,827
Rep Power: 27 |
Not converged, has nothing to do with good mesh. In my experience, the coarser the mesh, the better it converges. Since a fine mesh solves local phenomena better, you can easily end up with a transient solution, which will never converge in a steady state analysis. So maybe you are look for the wrong cause of fluent failing.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] ICEM - FLUENT - mesh quality compare | shereez234 | ANSYS Meshing & Geometry | 5 | November 28, 2015 13:57 |
[ICEM] ICEM CFD Problem with the boundary conditions while importing the mesh to fluent | sonic109 | ANSYS Meshing & Geometry | 2 | September 3, 2014 00:56 |
Export mesh from ICEM CFD for Fluent | summerdream | ANSYS | 2 | September 10, 2013 12:12 |
Inner geometry gets lost exporting mesh from ICEM CFD to CFX-Pre | powpow | CFX | 3 | December 20, 2012 09:14 |
prob while exporting icem cfd hexa mesh to fluent | mani | CFX | 4 | March 7, 2007 03:41 |