CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[DesignModeler] Creating two connected volumes with one contact face

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By siw

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 23, 2022, 14:39
Default Creating two connected volumes with one contact face
  #1
New Member
 
Abbas Shpour
Join Date: Jun 2022
Posts: 3
Rep Power: 3
Ashpour is on a distinguished road
Hey guys, in Gambit its easy two split a volume with a face to create two smaller volumes and one face between them, but in ANSYS (Space Claim or other geometry programs) when i split a volume with a face, it generates two volumes with two surfaces between them but I want only one contact face, any suggestions?
Ashpour is offline   Reply With Quote

Old   August 25, 2022, 03:22
Default
  #2
siw
Senior Member
 
Stuart
Join Date: Jul 2009
Location: Portsmouth, England
Posts: 731
Rep Power: 25
siw will become famous soon enough
Use Shared Topology.
Ashpour likes this.
siw is offline   Reply With Quote

Old   August 25, 2022, 08:38
Default
  #3
New Member
 
Abbas Shpour
Join Date: Jun 2022
Posts: 3
Rep Power: 3
Ashpour is on a distinguished road
Quote:
Originally Posted by siw View Post
Use Shared Topology.
in creating geometry stage or in mesh generating stage?
Ashpour is offline   Reply With Quote

Old   September 5, 2022, 07:17
Default
  #4
siw
Senior Member
 
Stuart
Join Date: Jul 2009
Location: Portsmouth, England
Posts: 731
Rep Power: 25
siw will become famous soon enough
Do this as the final part of the geometry preparation. The shared topology geometry is then passed to the mesh generation application.
siw is offline   Reply With Quote

Reply

Tags
geometry ansys, one contact surface, two volumes

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 15 November 18, 2020 07:09
[snappyHexMesh] Motorbike example: Failed 1 mesh checks lhsihan OpenFOAM Meshing & Mesh Conversion 2 December 11, 2018 08:54
[simpleFoam] Floating point exception seuchsy OpenFOAM Running, Solving & CFD 3 November 3, 2016 10:29
Hydrostatic Pressure and Gravity miliante OpenFOAM Running, Solving & CFD 132 October 7, 2012 23:50
[Netgen] Import netgen mesh to OpenFOAM hsieh OpenFOAM Meshing & Mesh Conversion 32 September 13, 2011 06:50


All times are GMT -4. The time now is 02:07.