 |
 |
 |
|
|
|
[Sponsors] | ||||
[ANSYS Meshing] Mesh Three airfoils linear cascade |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 18, 2024, 15:16
|
Mesh Three airfoils linear cascade
|
#1 |
|
New Member
Antonio
Join Date: Dec 2024
Posts: 1
Rep Power: 0  |
Hi Guys, I'm new and for my master's thesis I created an airfoil with a double circular arc camber line and then created a circular arc thickness distribution. now I have to run the cfd simulation with M>1 but I just can't create a well-structured mesh. could you help me. I upload the photo. the profile is 1 meter long and the professor told me to schematize the palate canal like this.If I find other ways, don't hesitate to tell me. I thank you in advance.
|
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 08:38 |
| [snappyHexMesh] snappyHexMesh stuck when snap is turned on | yukuns | OpenFOAM Meshing & Mesh Conversion | 3 | February 2, 2021 14:05 |
| [snappyHexMesh] non uniform mesh near the stl object | vava10 | OpenFOAM Meshing & Mesh Conversion | 0 | January 31, 2021 15:41 |
| [mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 19:57 |
| solution diverges when linear upwind interpolation scheme is used | subash | OpenFOAM | 0 | May 29, 2010 02:23 |
Linear Mode
