gambit meshing 3d

August 24, 2003, 08:36

hello every body

i want to mesh mixing tank with two horizontal pipes for inlet and outlet at three dimensional. it has mixer too.

lenght of tank=2.5 meter(H=2 m) , diameter of tank=2 meter (D=2 m), diameter of section of inlet and outlet= 3 centi meter(d=3 cm)

how can i do structured mesh? How can i compose it.

thanks

cfdproject · March 27, 2009, 18:43

I need to add a mixing fan at the outlet so that I can get a uniform temperature at the outlet using gambit.
Does gambit has any option that I can choose?

paka · March 30, 2009, 01:43

Don't really on me, but I don't like Gambit, it cause some pains to me. I would recommend Pointwise.

cfdproject · March 30, 2009, 14:55

I do not have access to point wise..I have to work my way in gambit..does any body know how I can do it gambit
Thanks

August 24, 2003, 08:36	gambit meshing 3d	#1
joda Guest Posts: n/a	hello every body i want to mesh mixing tank with two horizontal pipes for inlet and outlet at three dimensional. it has mixer too. lenght of tank=2.5 meter(H=2 m) , diameter of tank=2 meter (D=2 m), diameter of section of inlet and outlet= 3 centi meter(d=3 cm) how can i do structured mesh? How can i compose it. thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gambit - meshing over airfoil wrapping (?) problem	JFDC	FLUENT	1	July 11, 2011 05:59
[ANSYS Meshing] Migrating from GAMBIT to ANSYS Meshing	David-CFD	ANSYS Meshing & Geometry	1	April 1, 2011 05:22
[GAMBIT] Desperate student needs help meshing 3D GAMBIT model - please help!	lau06165	ANSYS Meshing & Geometry	1	March 22, 2010 01:09
Meshing problem in GAMBIT	Vidya Raja	FLUENT	0	May 20, 2006 23:31
Meshing Aircraft with Gambit	Ed	FLUENT	5	November 9, 2004 05:04

March 27, 2009, 18:43		#2
cfdproject New Member bilquise Join Date: Mar 2009 Posts: 14 Rep Power: 17	I need to add a mixing fan at the outlet so that I can get a uniform temperature at the outlet using gambit. Does gambit has any option that I can choose?

March 30, 2009, 01:43		#3
paka Senior Member Join Date: Mar 2009 Posts: 225 Rep Power: 18	Don't really on me, but I don't like Gambit, it cause some pains to me. I would recommend Pointwise.

March 30, 2009, 14:55		#4
cfdproject New Member bilquise Join Date: Mar 2009 Posts: 14 Rep Power: 17	I do not have access to point wise..I have to work my way in gambit..does any body know how I can do it gambit Thanks