CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

Conversion to Polyhedra

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 15, 2009, 03:12
Default Conversion to Polyhedra
  #1
ace
New Member
 
Anshuman Shevade
Join Date: Mar 2009
Posts: 1
Rep Power: 0
ace is on a distinguished road
Hello,

I am trying to convert a Hybrid Mesh into Polyhedra.
The quality of the hybrid mesh is fine.
Max Skew < 0.85
Max Warp < 0.5
FLUENT converts the mesh into Polyhedra but
subsequent Grid Check fails due to presence of
Left Handed Faces.

Any leads on how to solve this issue.

Thanks in advance for all the help.
ace is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Polyhedra and sliding mesh? rockewan FLUENT 5 December 1, 2018 20:07
Problems on Tetrahedra to Polyhedra using polyDualMesh on concave surface object chnrdu OpenFOAM Pre-Processing 2 July 18, 2009 13:58
[Commercial meshers] Several problems with the mesh conversion utility when converting the meshes from Gridgen su_junwei OpenFOAM Meshing & Mesh Conversion 2 July 27, 2008 00:58
iges conversion Laure Siemens 9 February 25, 2006 10:56
Energy Conversion Systems (Power and Pro.) Tools Gordan Feric / Engineering Software (EngWare) Main CFD Forum 0 August 27, 2001 00:14


All times are GMT -4. The time now is 01:12.